Electro-hydraulic levelling and
depth stop setting by SYNCHRO system
Automatic compensation of the sideframe-deflection
by means of table referenced measuring scales, coupled to
the SYNCHRO-system
Pendant control panel with CNC
control Robosoft ATS 560
X-axis: backgauge positioning,
programmable in 0.004"
Y1/Y2 hydraulic axes: depth stop
setting in 0.004"
Programmable working pressure,
ram stroke, ram opening
Adjustable speed change-over point
Selector switch for automatic return
of the beam
CNC controlled backgauge on ballscrews,
stroke 30", speed 4"/sec, including 2 universal
fingerblocks, manually adjustable in width and height
Ram and table machined to use N.A.
Style tooling
Operation, programming and maintenance
manual
Footpedal control
Filled oil tank
Comply hydraulically and electrical
with CZ142-02 standard
CONTROLS
ATS 560 (STANDARD)
7-segment LED display (8 digits)
Capacity of 200 programs / 400 steps
Manual adjustment of the program possible: upper dead
center, speed change-over point, backgauge retraction
Working on depth or pressure
Teach-in function on the depth axis
Jog function on the back-gauge
Absolute and incremental working of the back-gauge possible
Piece-counter (up and down) in manual and automatic mode
Diagnostics
ATS 600 (OPTION)
10" colour TFT screen
Hard disk
1.44 mb disk-drive
Serial DNC-link possible to send programs from off-line programming software
Library up to 30 materials, up to 167 top-tools and 167 bottom-tools
Automatic calculation of the bending force
Automatic calculation of the anti-deflection value (optional)
Manual adjustment of the program possible: upper dead point, speed change-over point, dwell time, delay, backgauge retraction, clamping point, auto-up function
Working on angle, depth or force
Bending angle programming with angle correction
Manual (step by step) or automatic executing of the programs
Automatic restart at last executed program
Absolute and incremental working of the backgauge position
Piece-counter in automatic mode
1 auxiliary output
Diagnostics
Backgauge on ballscrews, speed 7”/sec including 2 universal fingerblocks manually adjustable in width and height
ATS 900 (OPTION)
3 axes CNC Control
X-axis : backgauge, programmable in 0.1 mm
Y1-Y2 Axes: depth stop setting - 0.01 mm
10” colour TFT
Durable and easy to maintain keyboard due to polycarbonate cover
Solid state disk
1.44 mb disk-drive
possibility of dnc link between the control and external pc
Library up to 30 materials
Library up to 167 top-tools
Library up to 167 bottom tools
Automatic referencing of the back-gauge and the beam
Automatic calculation of the required force
Automatic cnc programme calculation
Automatic bending sequence calculation with userdefined degree of optimisation
Manual adjustment of the program possible : t.d.c., beam-speed, dwell time, fast-slow point, delay, tilt, retraction, clamping point, auto-up function
Color-graphic simulation of thebending sequence.
Automatic calculation of the blank sheet size
Automatic calculation of backgauge retraction, and generation
of the parameters required
