 |
| TSX MODEL |
 |
STANDARD EXECUTION
- 10ft x 1/4"
- 2 bottom-pull-down cylinders
- 2 cutting blades with 4 cutting sides
- Quick manual blade gap adjustment
- SP8 control
- Electro-hydraulic cutting angle adjustment with read-out
- Stroke counter with reset
- Squaring arm of 39" with scale, T-slot and 1 tilting stop
- Shearing table with a number of square iron support block
- Footpedal cutting command
- Tilting plate hold downs
- Motorized backgauge
- Delivered with filled oil tank, instructions and maintenance manual and service tools
|
| |
SP8
- Preselection backgauge position
- Digital read-out of the actual position
- Cutting angle setting with digital read-out
- Backlash compensation
- Programmable backgauge retraction
- Programmable cutting length
- Stroke counter
- Safety emergency stop button
|
 |
| |
| HSLX MODEL |
 |
STANDARD EXECUTION
- 10ft x 1/4" up to 20ft x 1-1/4"
- 2 top-push-down cylinders
- 2 cutting blades with 4 cutting sides
- Quick manual blade gap adjustment
- SC70 control
- Electro-hydraulic cutting angle adjustment with read-out
- Stroke counter with reset
- Squaring arm of 39" with scale, T-slot and 1 tilting stop
- Shearing table with a number of square iron support blocks
- Footpedal cutting command
- Tilting plate hold downs
- Motorized backgauge 39"
- Delivered with filled oil tank, instructions and maintenance manual and service tools
|
| |
SC 70
- 5" LCD display
- Memory capacity max. 200 programs with max. 400 steps
- Each program contains the basic cutting parameters such as material type, material thickness, blade gap and cutting angle setting
- Material list of max. 32 materials
- Electro-hydraulic blade gap setting
- Electro-hydraulic cutting angle setting
- Cutting length adjustment
- Programmable backgauge positioning
- Automatic programmable retraction of the backgauge
- Possibility of jog mode on backgauge
- Backlash compensation, delayed sheet release
- Mode selection Inch-Metric
- (Preset) counter with 0-stop
- Automatic and manual programming modes
- In combination with this control: backgauge with ballscrews, speed 4"/sec
|
 |