STANDARD EXECUTION

• Universal bolster for punching flat bar, angle iron and the flange of channel and / or beam
• Punching up to 1-1/2" in the standard execution
• Large hole attachment for punching up to 4.33" diameter as option available
• Heavy-duty support table on the punch & the shear station and the notch station fitted as standard - all with the same working height
• Low power inch mode and adjustable stroke on every station
• Unique 'Z' aperture enables the cutting of angle iron at every angle from 45° up to 90°, both internal and external (both flanges). Cutting flanges from large-sized angle-iron can be mitre cut with the shear
• Extensive range of applications - tube notching, bending, bar-end cropping, special shape punching,...
• Rectangular and triangular notching applications. The notching station can be transformed into a secondary punching station
• Extended safety features as standard equipment
• Centralized pressure lubrication
• High quality interchangeable bearings, seals, and valves with well-known brand names, available from stockists
• Machines with low maintenance requirements
• Punch adapters
• Swing away punch stripper unit
• Easy change punch holder
• 39" ruled length stop
• Service tool kit
• Work station guards
• Instruction, operating and maintenance manual
• Hydraulic oil included

PUNCHING

The Punch Station is designed to provide a very wide range of punching applications.

The multi-purpose bolster covers plate, flat bar, angle and flange punching of channel/joist - all of which can be punched up to diameter/diagonal of 1-1/2" in maximum capacity. Tooling available for special shapes and holes up to 4".

Easy change punch/die holders and swing-away stripper with simple thumb screw adjustment ensure quick setting times.

Large repetition table with stop and guides fitted as standard.

ANGLE CUTTING

This station has the unique 'Z' aperture which provides for angle iron cutting from 90° down to 45° using the fully adjustable hold-down to ensure a true cut. Precision mitre cutting of internal and external mitres - through both flanges - is easily achieved, giving each hand of the mitre at one hold-down setting.

NOTCHING

This is a very versatile station which is fitted as standard for rectangular notching - will also side notch.

Adjustable four edge notch dies permit re-grinding.

Additional tooling can give a wide range of options including: Vee notching from 22 1/2° to 90°, Flat bar and Sheet bending units, Tube notching, Bar end shaping and punching - this station can also take punch end tooling without extra adaptors.