 | |  |
Euromaster
 | |  |
The euromaster has been developed as a modern pressbrake with electronic levelling and depth control ROBOSOFT SYNCRO in combination with a number of flexible and user friendly CNC controls, graphic or non graphic at the choice of the customer.
In the SYNCHRO system the Y1 and Y2 axes operate as an independant double acting hydraulic system. Both axes share the same oil supply but the flow to the valves as well as true position(s) of the ram are entirely and separately controlled by computer command.
The CNC reads the ram position from independant linear encoders while monitoring and adjusting the proportional valves, producing a double-closed loop system.
By using this principle as well as the integration of the latest technologies, we have succeeded in developing a user-friendly, service-friendly, fast and accurate system.
Accuracy is further ensured by mounting the linear encoders on a C-frame connected to the bed, rather than directly on the side frames, so that deflection of the side frame and loads do not affect positionning. Accuracy is guaranteed up to 0.01mm
|
|
|
Download Brochure Now!
